1990 CHEVROLET Suburban Recalls

Recalls Found

All Recalls

CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.

NHTSA 06E043000

Report Date

19/05/2006

Component

FUEL SYSTEM, GASOLINE

Manufacturer

HONEYWELL INTERNATIONAL, INC.

Consequence: THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.

Remedy / Corrective Action

HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1).

UNANTICIPATED HEAT IN THE TRANSMISSION CAN FORCE THE TRANSMISSION FLUID OUT OF THE VENT TUBE.

NHTSA 93V016000

Report Date

01/02/1993

Component

POWER TRAIN:AUTOMATIC TRANSMISSION

Manufacturer

GENERAL MOTORS CORP.

Consequence: THE VENTED TRANSMISSION FLUID CAN CATCH FIRE IF EXPOSEDTO A SOURCE OF IGNITION.

Remedy / Corrective Action

INSTALL A LONGER TRANSMISSION VENT HOSE ROUTED TO THE LEFT SIDE OF THE ENGINE COMPARTMENT OF THE VEHICLE.

SEVERE CORROSION DUE TO ROAD SALT AT THE JOINT OF THE STAMPED STEEL CENTER SECTION AND THE CAST OUTER SECTION CAN CAUSE THE SECTIONS TO SEPARATE.

NHTSA 93V119000

Report Date

02/08/1993

Component

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR

Manufacturer

GENERAL MOTORS CORP.

Consequence: SEPARATION OF THE ROTOR SECTIONS CAN CAUSE LOSS OFBRAKING ABILITY IN THE AFFECTED WHEEL. THIS COULD RESULT IN INCREASED STOPPINGDISTANCE AND/OR LOSS OF VEHICLE CONTROL AND AN ACCIDENT.

Remedy / Corrective Action

REPLACE THE FRONT BRAKE ROTORS WITH NEW ROTORS WITH A CORROSION PROTECTION COATING. HOWEVER, IF REPLACEMENT OF BRAKE LININGS ARE NECESSARY, IT WILL BE DONE AT OWNER'S EXPENSE SINCE BRAKE LININGS ARE NORMAL MAINTENANCE ITEMS.

THE RECLINER MECHANISM AND THE SEAT FRAME MAY HAVE FOAM AND/OR VINYL BETWEEN THEM, CREATING A "SOFT" JOINT. THIS "SOFT" JOINT RESULTS IN LOWER THAN SPECIFIED BOLT TORQUE WHICH LEADS TO JOINT LOOSENESS, CAUSING BOLT FATIGUE AND EVENTUAL BOLT FAILURE.

NHTSA 93V187000

Report Date

16/11/1993

Component

SEATS

Manufacturer

GENERAL MOTORS CORP.

Consequence: IF BOLT FAILURE OCCURS TO THE DRIVER'S SEAT, IT WOULDALLOW THE SEAT BACK TO SUDDENLY RECLINE, AND COULD RESULT IN LOSS OF VEHICLECONTROL AND A VEHICLE CRASH WITHOUT PRIOR WARNING.

Remedy / Corrective Action

DEALERS WILL REMOVE THE FOAM AND/OR VINYL FROM BETWEEN THE RECLINER MECHANISM AND THE SEAT FRAME "SOFT" JOINT AND REPLACE THE RECLINER BOLTS.

⭐

4.5/5.0

39 reviews

Frequently Asked Questions

How many recalls does the 1990 CHEVROLET Suburban have?

The 1990 CHEVROLET Suburban currently has 4 recalls according to NHTSA records. All recall information is sourced directly from the National Highway Traffic Safety Administration database.

Are 1990 CHEVROLET Suburban recalls free to fix?

Yes! All safety recalls for 1990 CHEVROLET Suburban vehicles must be repaired free of charge by authorized dealers, regardless of vehicle age or mileage. Contact your local CHEVROLET dealer to schedule a recall repair.

How do I check if my 1990 CHEVROLET Suburban has open recalls?

You can check for open recalls by entering your VIN (Vehicle Identification Number) in our VIN decoder tool. The 17-character VIN can be found on your vehicle registration, insurance card, or on the driver's side dashboard visible through the windshield.