2019 INTERNATIONAL Workstar Recalls

VIN Decoder

Premium Report

Recalls Found

Radar Detector GPS Tracker OBD2 Scanner Car Refrigerator Jump Starter Dash Cam

As an Amazon Associate, ForCar.org earns from qualifying purchases.

All Recalls

Navistar, Inc. (Navistar) is recalling certain 2019 International HV, MV, 2018-2019 HX, LT, RH, LoneStar, ProStar, WorkStar, and 2018 TranStar automated manual transmission vehicles, equipped with certain Eaton ECA heavy-duty truck clutches. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.

NHTSA 18V826000

Report Date

21/11/2018

Component

POWER TRAIN:CLUTCH ASSEMBLY

Manufacturer

Navistar, Inc.

Consequence: Unintended vehicle movement can increase the risk of a crash.

Remedy / Corrective Action

Navistar will notify owners, and dealers will recalibrate the Transmission Control Module (TCM), free of charge. The recall began January 18, 2019. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18518.

Navistar, Inc. (Navistar) is recalling certain 2019-2020 International MV and HV, 2018-2020 Workstar, and 2018-2019 Durastar vehicles equipped with feature codes 12VXT and 12VXU. With the parking brake applied and the automatic transmission in the 'Drive' or 'Reverse' position, when the stationary PTO switch is engaged by the operator, the engine RPM will ramp up and may overcome the parking brake's ability to hold the vehicle.

NHTSA 19V841000

Report Date

21/11/2019

Component

ENGINE

Manufacturer

Navistar, Inc.

Consequence: Unintended vehicle movement increases the risk of a crash.

Remedy / Corrective Action

Navistar will notify owners, and dealers will update the Engine Control Module to enable the PTO neutral interlock, free of charge. The recall began January 16, 2020. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 19518.

Navistar, Inc. (Navistar) is recalling certain 2019 International HX, DuraStar, WorkStar, HV, LoneStar, LT, MV, and RH vehicles, and IC Bus HC, CE, and RE vehicles equipped with long stroke brake chambers and spring actuated parking brakes. The spring actuated parking brake may be improperly crimped to the long stroke service brake chamber, causing a service brake air leak and the possible separation of the spring brake chamber from the service brake section.

NHTSA 18V597000

Report Date

07/09/2018

Component

SERVICE BRAKES, AIR

Manufacturer

Navistar, Inc.

Consequence: An air leak or separation of the spring brake chamber can increase the needed stopping distance, increasing the risk of a crash.

Remedy / Corrective Action

Navistar will notify owners, and dealers will replace the brake chamber assemblies from the suspected lot, free of charge. The recall began October 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18512.

Navistar, Inc. (Navistar) is recalling certain 2019 International WorkStar and International HV vehicles equipped with Meritor MX-14-120 EVO steer axles. The axles may have insufficient lubrication, which may result in damage to the wheel end bearings.

NHTSA 20V229000

Report Date

22/04/2020

Component

POWER TRAIN:AXLE ASSEMBLY

Manufacturer

Navistar, Inc.

Consequence: If the bearings are damaged, the wheel may separate and cause a sudden loss of vehicle control, increasing the risk of crash.

Remedy / Corrective Action

Navistar will notify owners, and dealers will inspect the steer axle wheel hubs for proper fluid level and repair any damaged wheel end components and spindles, as necessary, free of charge. The recall began May 1, 2020. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 20503.

Navistar, Inc. (Navistar) is recalling certain 2018-2019 International WorkStar, International DuraStar, 2019-2021 International HV, International MV, and IC Bus RE Commercial Bus vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.

NHTSA 21V366000

Report Date

19/05/2021

Component

FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL

Manufacturer

Navistar, Inc.

Consequence: A fuel leak in the presence of an ignition source increases the risk of a fire.

Remedy / Corrective Action

Dealers will inspect the rail threads, and replace the rail as necessary, free of charge. Owner notification letters were mailed on June 21, 2021. Owners may contact Navistar customer service at 1-800-448-7825.

Navistar, Inc. (Navistar) is recalling certain 2017-2020 International WorkStar and International DuraStar, 2018-2019 IC 1300 FBC Commercial and IC HC Commercial, 2018-2021 IC CE Commercial, International MV and International HV, and 2019-2021 IC TC Commercial buses with Cummins B6.7 diesel engines with a fuel module option number FS90301 or FS90453. The electric fuel heater within the fuel module may overheat and cause plastic in the fuel heater to melt and potentially catch fire. It may also lead to engine stalling.

NHTSA 20V219000

Report Date

17/04/2020

Component

FUEL SYSTEM, DIESEL: PRE-HEATER

Manufacturer

Navistar, Inc.

Consequence: A fire increases the risk of injury. An engine stall can increase the risk of a crash.

Remedy / Corrective Action

Cummins will notify the affected Navistar customers and dealers will disable the fuel heater by either installing a plug in place of the heater or otherwise rendering the fuel heater inoperable and removing the fuse supplying electrical power to the fuel heater and installing a cover over the wire harness connector, free of charge. The recall began May 28, 2020. Owners may contact Cummins customer service at 1-800-286-6467.

Navistar, Inc. (Navistar) is recalling certain 2018-2019 International WorkStar, DuraStar, LoneStar, LT, ProStar, RH and IC Bus HC, 2018 International TranStar, 2019 International HV and MV trucks and transit buses. The front driver and passenger seat belt anchor D-ring bolt may break in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages."

NHTSA 18V293000

Report Date

03/05/2018

Component

SEAT BELTS:FRONT:ANCHORAGE

Manufacturer

Navistar, Inc.

Consequence: If the D-ring bolt breaks during a crash, the seat occupant may not be properly restrained, increasing their risk of injury.

Remedy / Corrective Action

Navistar has notified owners, and dealers will replace the D-ring bolt depending on the information found on the seat belt label, free of charge. The recall began May 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18505.

Navistar, Inc. (Navistar) is recalling certain 2017-2020 International DuraStar and WorkStar, 2018-2020 IC Bus CECB, International HV and MV, 2018-2019 IC Bus 1300 FBC and HCCB, and 2019-2020 IC Bus TCCB vehicles equipped with Cummins B6.7 diesel engines with fuel module option number FS90301 or FS90453. The electric fuel heater within the fuel module may overheat and cause plastic in the fuel heater to melt and potentially catch fire. It may also lead to engine stalling.

NHTSA 19V216000

Report Date

20/03/2019

Component

FUEL SYSTEM, DIESEL: PRE-HEATER

Manufacturer

Navistar, Inc.

Consequence: A fire increases the risk of injury. An engine stall can increase the risk of crash.

Remedy / Corrective Action

Cummins will notify the affected Navistar owners. Cummins dealers will replace the fuel heater with a newly designed fuel heater, free of charge. The recall began May 2, 2019. Owners may contact Cummins customer service at 1-800-286-6467 or Navistar customer service at 1-800-448-7825.

Navistar, Inc. (Navistar) is recalling certain 2016-2017 International TranStar, 2017-2019 International ProStar, International LoneStar, 2017-2020 International DuraStar, WorkStar, and 2018-2019 IC Bus HC Commercial buses. The heating, ventilation, and air-conditioning (HVAC) blower motor circuit may have an insufficient wiring terminal that can overheat.

NHTSA 23V248000

Report Date

06/04/2023

Component

ELECTRICAL SYSTEM:WIRING

Manufacturer

Navistar, Inc.

Consequence: An overheated electrical circuit can increase the risk of a fire.

Remedy / Corrective Action

Dealers will replace the HVAC blower motor load circuit wiring terminal, free of charge. Owner notification letters are expected to be mailed June 5, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23510.

International Motors, LLC (International) is recalling certain 2024 HV, 2020-2025 MV, and 2019 Workstar 7400 trucks. The caliper may contact a suspension spring or axle U-bolt and prevent the outer brake pad from functioning.

NHTSA 25V178000

Report Date

21/03/2025

Component

SERVICE BRAKES, AIR:DISC:CALIPER

Manufacturer

International Motors, LLC

Consequence: A loss of outer brake pad function can extend the vehicle's stopping distance, increasing the risk of a crash.

Remedy / Corrective Action

Dealers will switch the left and right rear air disc brake calipers, replace the rear brake torque plates, and replace the brake pads, free of charge. Owner notification letters were mailed May 12, 2025. Owners may contact International customer service at 1-800-448-7825. International's number for this recall is 25501.

4.5/5.0

40 reviews

Where to Find VIN for Recall Check

To check for recalls on your 2019 INTERNATIONAL Workstar, you'll need the VIN number. Find your VIN in one of these 4 common locations.

Where to Find VIN Number on 2019 INTERNATIONAL Workstar for Recall Lookup - Dashboard, Door Jamb, Engine Bay, Documents

Understanding VIN Structure for Recall Verification

Each character in your 2019 INTERNATIONAL Workstar 17-digit VIN helps identify specific recalls affecting your vehicle. Learn how the VIN structure works for accurate recall lookup.

2019 INTERNATIONAL Workstar VIN Structure for Recall Verification - WMI, VDS, Check Digit, Model Year, Plant Code

How to Check 2019 INTERNATIONAL Workstar Recalls in 3 Steps

Locate Your VIN

Find the 17-character VIN on your 2019 INTERNATIONAL Workstar dashboard (visible through windshield), door jamb, engine bay, or vehicle documents.

Enter VIN in Checker

Input your VIN into our free recall checker tool above to search NHTSA database for safety recalls, TSBs, and service campaigns specific to your vehicle.

Review & Schedule Repair

Check the recall details including affected components, consequences, and remedy. Contact your INTERNATIONAL dealer to schedule free recall repair appointment.

Frequently Asked Questions

How many recalls does the 2019 INTERNATIONAL Workstar have?

The 2019 INTERNATIONAL Workstar currently has 10 recalls according to NHTSA records. All recall information is sourced directly from the National Highway Traffic Safety Administration database.

Are 2019 INTERNATIONAL Workstar recalls free to fix?

Yes! All safety recalls for 2019 INTERNATIONAL Workstar vehicles must be repaired free of charge by authorized dealers, regardless of vehicle age or mileage. Contact your local INTERNATIONAL dealer to schedule a recall repair.

How do I check if my 2019 INTERNATIONAL Workstar has open recalls?

You can check for open recalls by entering your VIN (Vehicle Identification Number) in our VIN decoder tool. The 17-character VIN can be found on your vehicle registration, insurance card, or on the driver's side dashboard visible through the windshield.

Where can I find my 2019 INTERNATIONAL Workstar VIN number?

Your 2019 INTERNATIONAL Workstar VIN is located in 4 places: (1) Dashboard near windshield on driver's side, (2) Driver's door jamb sticker, (3) Engine bay, (4) Vehicle registration and insurance documents.

What should I do if my 2019 INTERNATIONAL Workstar has a recall?

Contact your nearest INTERNATIONAL dealership immediately to schedule a free recall repair. Bring your vehicle registration or VIN number. All safety recalls must be fixed free of charge by the manufacturer, regardless of vehicle age or mileage.

Are NHTSA recalls mandatory to fix on 2019 INTERNATIONAL Workstar?

While not legally required for vehicle owners to fix recalls, it's strongly recommended for safety. However, dealerships and manufacturers must offer free repairs for all official NHTSA recalls on 2019 INTERNATIONAL Workstar vehicles.