2010 NABI 416 Recalls

Recalls Found

All Recalls

New Flyer Industries, Ltd. (New Flyer) is recalling certain model year 2015 New Flyer MD30, 2012 C35LFR, 2010-2011 D35LFR, NABI 35LFW, 2011 D40LFR, 2010-2012 D60LFR and NABI 31LFW, 2010 C40LF, DE35LF, D40LF, DE40LFA, DE60LFA, GE35LFR and GE40LF, 2009 DE60LF and GE40LFR, 2010-2013 C40LFR, DE60LFR, NABI 416 and NABI 60BRT, 2010-2015 XD35, XDE40, NABI 40LFW and 42BRT, 2011-2015 XD40 and XN40, 2013-2015 XD60, XDE60 and XN35, 2010-2014 XDE35, 2013 XE40, 2012-2015 XN60, equipped with certain Recaro Ergo-M Commercial Bus Driver Seats. The affected seats have J-Brackets that may be missing welds which could allow the seat belt anchorage assembly to separate from the J-Bracket.

NHTSA 16V038000

Report Date

26/01/2016

Component

SEATS

Manufacturer

New Flyer Industries Ltd.

Consequence: If the seatbelt anchorage assembly separates from the J-Bracket, the bus driver may not be properly restrained in the event of a crash, increasing their risk of injury.

Remedy / Corrective Action

New Flyer will notify owners instructing them to inspect their seats for missing welds. Recaro will supply replacement anchorage brackets and cover the labor to replace them if any welds are missing, free of charge. The recall began on February 4, 2016. Owners may contact New Flyer customer service at 1-204-224-6706, or Recaro customer service at 1-800-873-2276. New Flyer's number for this recall is R16-001.

NABI Bus, LLC (NABI) is recalling certain model year 2012 31LFW transit buses manufactured April 28, 2012, to December 16, 2012, and 2008-2013 416 transit buses manufactured October 30, 2008, to February 15, 2014. The affected vehicles may not be equipped with a transmission interlock that prevents the wheelchair lift or ramp from being moved from the stowed position unless the transmission is in neutral. As such, the buses fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 403, "Platform Lift Systems for Motor Vehicles."

NHTSA 14V587000

Report Date

23/09/2014

Component

EQUIPMENT ADAPTIVE/MOBILITY

Manufacturer

NABI Bus, LLC

Consequence: If the wheelchair lift or ramp can be removed from the stowed position while the transmission is not in neutral, if the service brakes fail to hold the bus, the bus may move unexpectedly, increasing the risk of injury to the wheelchair lift or ramp user.

Remedy / Corrective Action

NABI will notify owners, and dealers will install a new electrical program that prevents the lift or ramp from being moved from the stowed position unless the transmission is in neutral, free of charge. The recall began in November 2014. Owners may contact NABI customer service at 1-256-241-1298. NABI's number for this recall is 20146.

NORTH AMERICAN BUS INDUSTRIES (NABI) IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 416 TRANSIT BUSES MANUFACTURED FROM SEPTEMBER 1, 2010, THROUGH FEBRUARY 28, 2011, EQUIPPED WITH A CUMMINS ISL DIESEL ENGINE. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.

NHTSA 11V444000

Report Date

30/08/2011

Component

ENGINE AND ENGINE COOLING:EXHAUST SYSTEM

Manufacturer

NORTH AMERICAN BUS INDUSTRIES, INC.

Consequence: IF THE INLET OR OUTLET SECTIONS DISCONNECT, HOT EXHAUST GASES CAN VENT PRIOR TO EXITING THE TAILPIPE, CREATING THE RISK OF COMBUSTION AND A FIRE. IF BOTH CLAMPS FAIL, THERE IS A RISK IN SOME APPLICATIONS THAT THE DOC/DPF HOUSING MAY DETACH COMPLETELY, CREATING A ROAD HAZARD.

Remedy / Corrective Action

NABI IS WORKING WITH CUMMINS TO IDENTIFY AND NOTIFY OWNERS OF THE RECALL CAMPAIGN. REPAIRS WILL BE PERFORMED BY AUTHORIZED CUMMINS DEALERS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 10, 2011. OWNERS MAY CONTACT CUMMINS AT 1-812-377-5000 OR NABI AT 1-256-831-4296.

North American Bus Industries (NABI) is recalling certain model year 2010 416 and 40LFW transit buses manufactured from January 1, 2010, through November 30, 2010. The emergency release handles on the emergency egress passenger windows may fail, causing the window release mechanism to operate improperly.

NHTSA 12V444000

Report Date

12/09/2012

Component

VISIBILITY

Manufacturer

NORTH AMERICAN BUS INDUSTRIES, INC.

Consequence: In the event of an emergency, the windows may fail to open and passengers may be delayed in exiting, increasing the risk of personal injury.

Remedy / Corrective Action

NABI will inspect and replace the window release handles, free of charge. The safety recall began on November 9, 2012. Owners may contact NABI at 1-256-831-4296.

North American Bus Industries (NABI) is recalling certain model year 2008-2013 416 and model year 2012 31LFW transit buses manufactured October 30, 2008, through April 3, 2013 and equipped with a four-position rotary defroster switch with ring terminals. The defroster switch may overheat and melt the dash.

NHTSA 13V131000

Report Date

10/04/2013

Component

ELECTRICAL SYSTEM

Manufacturer

North American Bus Industries, Inc.

Consequence: The overheating of the switch may lead to a fire or distract the driver and increase the risk of a vehicle crash.

Remedy / Corrective Action

NABI will notify owners and will install relays to reduce the current flow. This will be done free of charge. Owners may contact NABI at 1-256-831-4296. NABI's campaign number is 20133.

⭐

4.7/5.0

71 reviews

Frequently Asked Questions

How many recalls does the 2010 NABI 416 have?

The 2010 NABI 416 currently has 5 recalls according to NHTSA records. All recall information is sourced directly from the National Highway Traffic Safety Administration database.

Are 2010 NABI 416 recalls free to fix?

Yes! All safety recalls for 2010 NABI 416 vehicles must be repaired free of charge by authorized dealers, regardless of vehicle age or mileage. Contact your local NABI dealer to schedule a recall repair.

How do I check if my 2010 NABI 416 has open recalls?

You can check for open recalls by entering your VIN (Vehicle Identification Number) in our VIN decoder tool. The 17-character VIN can be found on your vehicle registration, insurance card, or on the driver's side dashboard visible through the windshield.