VIN Decoder Results
2NP3LJ0X8LM671083
Basic Information
Vehicle Make
PETERBILT
Vehicle Model
348
Additional Information
Additional Error Text
Incomplete Vehicle Warning - Please be advised that the vehicle may have been altered and may not be an accurate representation of the vehicle in its current condition. The Model Year decoded for this VIN may be incorrect. If you know the Model year, please enter it and decode again to get more accurate information.
Error Text
0 - VIN decoded clean. Check Digit (9th position) is correct
Vehicle Descriptor
2NP3LJ0X*LM
Manufacturer Name
PETERBILT MOTORS COMPANY
Model Year
2020
Plant City
MONTREAL
Vehicle Type
INCOMPLETE VEHICLE
Plant Country
CANADA
Plant Company Name
Peterbilt
Plant State
QUEBEC
Body Class
Truck
Gross Vehicle Weight Rating From
Class 8: 33,001 lb and above (14,969 kg and above)
Gross Vehicle Weight Rating To
Class 8: 33,001 lb and above (14,969 kg and above)
Cab Type
MDHD: Conventional
Drive Type
6x4
Brake System Type
Air
Engine Number Of Cylinders
6
Displacement (CC)
8900.0
Displacement (CI)
543.11132244311
Displacement (L)
8.9
Engine Stroke Cycles
4
Engine Model
PX-9
Fuel Type - Primary
Diesel
Engine Configuration
In-Line
Engine Brake (hp) From
260
Engine Brake (hp) To
450
Engine Manufacturer
PACCAR
VIN Breakdown
2NP
World Manufacturer Identifier
3LJ0X
Vehicle Descriptor Section
8
Check Digit
LM671083
Vehicle Identifier Section
Safety Recalls (5 Found)
Total Recalls
5
Vehicle
2020 PETERBILT 348
Source
NHTSA Database
STEERING:COLUMN
PACCAR Incorporated (PACCAR) is recalling certain 2019-2020 Peterbilt 337 and 348 vehicles. An incorrectly located weld in the steering shaft may crack and cause the lower shaft within the steering column to separate from the mating yoke.
Consequence:
If the steering column separates from the mating yoke, loss of steering control can occur, increasing the risk of a crash.
Remedy:
PACCAR has notified owners, and dealers will inspect and replace the steering column, if necessary, free of charge. The recall began August 30, 2019. Owners may contact PACCAR customer service at 1-
Campaign: 19V618000
POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT
PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T800, T880 and W990 and Peterbilt 348, 367, 389, 520, and 567 vehicles. The forward rear axle output shafts may have been improperly heat treated during manufacturing, possibly resulting in the shafts fracturing.
Consequence:
If the rear axle output shaft fractures, the shaft or interaxle driveline could detach and become a road hazard, increasing the risk of a crash.
Remedy:
PACCAR will notify owners, and dealers will inspect and replace the output shafts, as necessary, free of charge. The recall began February 19, 2020. Owners may contact Kenworth customer service at 1
Campaign: 19V911000
POWER TRAIN:AXLE ASSEMBLY
PACCAR Incorporated (PACCAR) is recalling certain 2020-2021 Peterbilt 348, 365, 367, 389, 520, 567 and Kenworth T800, T880, W900, W990 vehicles equipped with Watson and Chalin steerable lift axle suspension systems (model SL2065). The axles may have lower rear pivot bolts that are not long enough t...
Consequence:
The short screws can cause the hardware to separate from the suspension system and become road hazards, increasing the risk of a crash and/or injury.
Remedy:
PACCAR will notify owners, and dealers will inspect suspect chassis and replace the pivot bolts, as necessary, free of charge. The recall began September 29, 2020. Owners may contact Kenworth custom
Campaign: 20V506000
Explore This Vehicle
All Years
PETERBILT 348 — All Years →
All Models
All PETERBILT Models →
Window Sticker
View Monroney Label →
Free VIN Check
Enter a 17-character VIN to get a free vehicle check — specs, recalls, safety ratings, and fuel economy data.