2013 KENWORTH T680 Recalls & Safety Issues
Official recalls, technical service bulletins (TSBs), and safety issues from the National Highway Traffic Safety Administration (NHTSA).
VIN Decoder
13
Recalls Found
As an Amazon Associate, ForCar.org earns from qualifying purchases.
All Recalls
PACCAR Incorporated (PACCAR) is recalling certain 2013-2019 Kenworth T680 and T880 and Peterbilt 579 trucks, greater than 30 feet long and equipped with side extender mounted intermediate marker lamp/turn signals that do not include a reflex reflector. Since both intermediate side marker lamps and reflex reflectors are required, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
NHTSA 18V816000
Consequence: Missing reflex reflectors can reduce the vehicle's visibility to other drivers, increasing the risk of a crash.
Remedy / Corrective Action
PACCAR will notify owners and dealers will install reflex reflective tape, free of charge. The recall began January 15, 2019. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's number for this recall is 18KWF, and 18PBC.
PACCAR Incorporated (PACCAR) is recalling certain 2013-2017 Peterbilt 567 and 579 Kenworth T680 and T880 trucks equipped with optional spotlights. The spotlight circuit may not be adequately protected in the event of a short.
NHTSA 17V471000
Consequence: A short in the spotlight circuitry may increase the risk of a fire at the cab fuse block.
Remedy / Corrective Action
PACCAR will notify owners, and dealers will change the polyfuse switch in the spotlight circuit to a standard fuse, free of charge. The recall began on September 19, 2017. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's number for this recall is 17KWC and 717-B.
PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T440, T470, T660, T680, and T880 trucks manufactured January 14, 2010, to May 22, 2015, and equipped with HID Headlamps and the option for Daytime Running Lamps (DRL). The DRLs are required to deactivate when the hazard warning lights are activated, however, the DRLs on these vehicles override the hazard flashing functionality after the brake pedal is pushed for more than two seconds. Normal hazard flashing functionality returns once the service brake is released. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 108, "Lamps, Reflective Devices, and Associated Equipment."
NHTSA 15V458000
Consequence: If the hazard warning lamps are overridden by the DRL, oncoming vehicles may fail to be warned, increasing the risk of a crash.
Remedy / Corrective Action
Kenworth will notify owners, and dealers will update the cab controller software, free of charge. The recall began on September 167, 2015. Owners may contact Kenworth customer service at 1-425-828-5000. Kenworth's number for this recall is 15KWL.
PACCAR Incorporated (PACCAR)is recalling certain model year 2013-2014 T660, and T680 vehicles manufactured from December 4, 2012, through September 17, 2013 and configured as a dead axle tandem with air disc brakes and spring brake delete options. The affected vehicles have the parking brake incorrectly placed on the non-driven rear axle.
NHTSA 14V027000
Consequence: If the parking brake is on the non-driven axle the vehicle could roll away when the parking brakes are set, resulting in an increased risk of a crash.
Remedy / Corrective Action
PACCAR will notify owners, and dealers will move the parking brake components to the forward wheel axle, free of charge. The recall began on April 9, 2014. Owners may contact PACCAR at 1-425-468-7400. Paccar's number for this recall is 14KWE.
PACCAR is recalling certain model year 2013-2014 Kenworth T680 and T880 trucks, manufactured from January 18, 2012, through February 1, 2013; and model year 2013-2014 Peterbilt 579 and 567 vehicles, manufactured from January 20, 2012, through January 31, 2013. The Exterior Lights Self-Test switch is intended to be used when the vehicle is parked. If the switch is pressed while the vehicle is in motion, the Exterior Lights Self-Test switch will cause all exterior lighting to be extinguished.
NHTSA 13V048000
Consequence: An unexpected loss of lighting during vehicle operation may reduce the driver's ability to see other vehicles, pedestrians, or objects, as well as reduce the truck's visibility to other drivers or pedestrians, increasing the risk of crash.
Remedy / Corrective Action
PACCAR will notify owners, and dealers will disable the Exterior Lights Self-Test software parameter and remove the Exterior Lights Self-Test switch and install a switch plug in its place. The services will be offered free of charge. The recall began on February 28, 2013. Owners may contact Kenworth at 1-425-828-5000 or Peterbilt at 1-940-591-4000.
PACCAR is recalling certain model year 2013 Kenworth T680 vehicles, manufactured from November 29, 2012, through December 6, 2012; and model year 2013 Peterbilt 579 and 567 vehicles, manufactured from August 28, 2012, through December 31, 2012. These vehicles were equipped with the air suspension dump valve option. New software may cause the rear air suspension to re-inflate without warning when the operator turns the ignition key to the "off" position.
NHTSA 13V027000
Consequence: An unexpected re-inflation of the suspension could result in personal injury to a person near the rear suspension.
Remedy / Corrective Action
PACCAR will notify owners, and dealers will reprogram the software. The recall will begin during February 2013. Owners may contact Kenworth at 1-425-828-5000 or Peterbilt at 1-940-591-4000.
PACCAR IS RECALLING CERTAIN MODEL YEAR 2013 KENWORTH T680 VEHICLES EQUIPPED WITH A 76 SLEEPER AND GREY OR TAN COLOR-MATCHED BUNK RESTRAINTS FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 302, "FLAMMABILITY OF INTERIOR MATERIALS."
NHTSA 12V249000
Consequence: FLAMMABLE MATERIAL, IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN A FIRE.
Remedy / Corrective Action
PACCAR WILL NOTIFY OWNERS AND INSTALL NEW BUNK RESTRAINTS IN THE AFFECTED VEHICLES. THE SAFETY RECALL BEGAN ON JULY 13, 2012. OWNERS MAY CONTACT KENWORTH AT 1-425-828-5440.
PACCAR is recalling certain model year 2013-2014 Kenworth T680 and T880 trucks and model year 2013-2014 Peterbilt 567, 579 and 587 trucks equipped with air ride seats. The cables for anchoring the seat belt buckles of both the driver and passenger seat may fray.
NHTSA 13V091000
Consequence: In the event of a crash, a frayed seat belt could cause the belt to separate from the seat, increasing the risk of injury to the seat occupant.
Remedy / Corrective Action
PACCAR will notify owners, and dealers will replace both seat belt buckle assemblies, free of charge. The recall began on May 9, 2013. Owners may contact Kenworth at 1-425-828-5000 or Peterbilt at 1-940-591-4000.
Paccar is recalling certain model year 2013 Kenworth T680 vehicles, manufactured from January 19, 2012, through May 15, 2012. The warning label located on the front of the upper bunk may deform after installation, making the text unreadable.
NHTSA 12V333000
Consequence: If the warning label is not readable, the occupant may be unaware of the safety recommendations and be at an increased risk of personal injury in a crash or sudden vehicle deceleration.
Remedy / Corrective Action
Paccar will notify owners, and dealers will replace the warning label in the affected vehicles. The safety recall began on August 20, 2012. Owners may contact Kenworth at 1-425-828-5440.
PACCAR IS RECALLING CERTAIN MODEL YEAR 2013 KENWORTH T680 VEHICLES, MANUFACTURED FROM JANUARY 19, 2012, THROUGH MAY 15, 2012. THE UPPER BUNK RESTRAINT BELT AND BUCKLE ASSEMBLY MAY BE LESS THAN THE SPECIFIED STRENGTH.
NHTSA 12V332000
Consequence: IN THE EVENT OF A CRASH OR SUDDEN VEHICLE DECELERATION, AN UNEXPECTED UNLATCHING OF THE UPPER BUNK RESTRAINT HARNESS BUCKLE COULD OCCUR, INCREASING THE RISK OF PERSONAL INJURY TO AN OCCUPANT.
Remedy / Corrective Action
PACCAR WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE UPPER BUNK RESTRAINTS IN THE AFFECTED VEHICLES. THE SAFETY RECALL BEGAN ON AUGUST 20, 2012. OWNERS MAY CONTACT KENWORTH AT 1-425-828-5440.
PACCAR Inc. is recalling certain model year 2013-2014 Kenworth T680 chassis manufactured January 1, 2012, through October 14, 2013, and Peterbilt 567 and 579 chassis manufactured January 20, 2012, through October 11, 2013, and equipped with Inteva-brand door latch assemblies. In the affected vehicles, the doors may lock permanently while closed or may be opened from the outside even after they have been locked.
NHTSA 14V012000
Consequence: If the door latch assembly becomes permanently locked while closed occupants could be prevented from exiting the vehicle in the event of a crash or fire, increasing the risk of injury.
Remedy / Corrective Action
PACCAR will notify owners, and dealers will replace the left and right door latch assemblies with new assemblies, free of charge. The recall began on March 25, 2014. Customers may contact Paccar at 1-425-468-8228. Kenworth's number for this recall is 14KWB. Peterbilt's number for this recall is 114-A.
PACCAR IS RECALLING CERTAIN MODEL YEAR 2013 KENWORTH T680, AND PETERBILT 579 VEHICLES, FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 121, "AIR BRAKE SYSTEMS." THESE VEHICLES EXCEED THE BRAKE TIMING TEST REQUIREMENTS OF FMVSS 121 FOR TRAILER CIRCUITS WHEN 15 FOOT COILED TRAILER LINES ARE USED.
NHTSA 12V214000
Consequence: THE LONGER BRAKE APPLY TIME MAY RESULT IN EXTENDED STOPPING DISTANCES, INCREASING THE RISK OF A CRASH.
Remedy / Corrective Action
PACCAR WILL NOTIFY OWNERS AND INSTALL A RELAY VALVE ON THE AFFECTED VEHICLES. ALL THE VEHICLES HAVE BEEN REPAIRED. OWNER MAY CONTACT KENWORTH AT 1-425-828-5440 AND PETERBILT AT 1-940-591-4196.
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
NHTSA 20V199000
Consequence: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Remedy / Corrective Action
PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.
Where to Find VIN for Recall Check
To check for recalls on your 2013 KENWORTH T680, you'll need the VIN number. Find your VIN in one of these 4 common locations.
Understanding VIN Structure for Recall Verification
Each character in your 2013 KENWORTH T680 17-digit VIN helps identify specific recalls affecting your vehicle. Learn how the VIN structure works for accurate recall lookup.
How to Check 2013 KENWORTH T680 Recalls in 3 Steps
1
Locate Your VIN
Find the 17-character VIN on your 2013 KENWORTH T680 dashboard (visible through windshield), door jamb, engine bay, or vehicle documents.
2
Enter VIN in Checker
Input your VIN into our free recall checker tool above to search NHTSA database for safety recalls, TSBs, and service campaigns specific to your vehicle.
3
Review & Schedule Repair
Check the recall details including affected components, consequences, and remedy. Contact your KENWORTH dealer to schedule free recall repair appointment.
Frequently Asked Questions
How many recalls does the 2013 KENWORTH T680 have?
The 2013 KENWORTH T680 currently has 13 recalls according to NHTSA records. All recall information is sourced directly from the National Highway Traffic Safety Administration database.
Are 2013 KENWORTH T680 recalls free to fix?
Yes! All safety recalls for 2013 KENWORTH T680 vehicles must be repaired free of charge by authorized dealers, regardless of vehicle age or mileage. Contact your local KENWORTH dealer to schedule a recall repair.
How do I check if my 2013 KENWORTH T680 has open recalls?
You can check for open recalls by entering your VIN (Vehicle Identification Number) in our VIN decoder tool. The 17-character VIN can be found on your vehicle registration, insurance card, or on the driver's side dashboard visible through the windshield.
Where can I find my 2013 KENWORTH T680 VIN number?
Your 2013 KENWORTH T680 VIN is located in 4 places: (1) Dashboard near windshield on driver's side, (2) Driver's door jamb sticker, (3) Engine bay, (4) Vehicle registration and insurance documents.
What should I do if my 2013 KENWORTH T680 has a recall?
Contact your nearest KENWORTH dealership immediately to schedule a free recall repair. Bring your vehicle registration or VIN number. All safety recalls must be fixed free of charge by the manufacturer, regardless of vehicle age or mileage.
Are NHTSA recalls mandatory to fix on 2013 KENWORTH T680?
While not legally required for vehicle owners to fix recalls, it's strongly recommended for safety. However, dealerships and manufacturers must offer free repairs for all official NHTSA recalls on 2013 KENWORTH T680 vehicles.
Other Years - KENWORTH T680
Other KENWORTH Models
540
542
548CH
C5 Series
C500
C540
C550
K 100E
K100
K260/K360
K270/K370
K3 Series
K300
KS
KT
KW45/KW55
L7 Series
L700
L770
Other Off-Highway
Similar Brands
LONCIN
14 models
ROSA
2 models
SCANIA
1 models
TOYOTA
56 models
GASGAS
4 models
KTM
95 models
MAYBACH
2 models
CHEVROLET
123 models
MONACO
4 models
SIERRA
5 models