1991 FORD Probe Recalls

Recalls Found

All Recalls

BRACKETS MOUNTING AUTOMATIC SHOULDER BELT RETRACTOR ASSEMBLY MAY HAVE AN UNDERSTRENGTH SPOT WELD.

NHTSA 91V016000

Report Date

01/01/1991

Component

SEAT BELTS:FRONT:ANCHORAGE

Manufacturer

FORD MOTOR COMPANY

Consequence: SHOULDER BELT COULD FAIL IN A COLLISION INCREASING THERISK OF INJURY TO THE OCCUPANT.

Remedy / Corrective Action

INSTALL TWO BOLTS IN THE BRACKETS TO PREVENT SHOULDER BELT FAILURE.

NOTE: PASSENGER SIDE (RIGHT) SEAT BELT ASSEMBLY. THE RAIL OF THE AUTOMATIC SHOULDER BELT CAN WEAR SUFFICIENTLY SUCH THAT THE CABLE WHICH RETRACTS THE BUCKLE ASSEMBLY WILL BECOME JAMMED IN THE RAIL RENDERING THE SHOULDER BELT INOPERATIVE.

NHTSA 96V172002

Report Date

06/09/1996

Component

SEAT BELTS:FRONT:WEBBING

Manufacturer

FORD MOTOR COMPANY

Consequence: IN THE EVENT OF A VEHICLE CRASH, THE OCCUPANT WOULD NOT BE ADEQUATELY RESTRAINED INCREASING THE RISK OF PERSONAL INJURY.

Remedy / Corrective Action

DEALERS WILL REPLACE DRIVER SIDE AND INOPERATIVE PASSENGER SIDE SHOULDER BELT TRACK ASSEMBLIES.

NOTE: DRIVER'S SIDE (LEFT) PASSIVE SEAT BELT ASSEMBLY. THE RAIL OF THE AUTOMATIC SHOULDER BELT CAN WEAR SUFFICIENTLY SUCH THAT THE CABLE WHICH RETRACTS THE BUCKLE ASSEMBLY WILL BECOME JAMMED IN THE RAIL RENDERING THE SHOULDER BELT INOPERATIVE.

NHTSA 96V172001

Report Date

06/09/1996

Component

SEAT BELTS:FRONT:WEBBING

Manufacturer

FORD MOTOR COMPANY

Consequence: IN THE EVENT OF A VEHICLE CRASH, THE OCCUPANT WOULD NOT BE ADEQUATELY RESTRAINED INCREASING THE RISK OF PERSONAL INJURY.

Remedy / Corrective Action

DEALERS WILL REPLACE DRIVER SIDE AND INOPERATIVE PASSENGER SIDE SHOULDER BELT TRACK ASSEMBLIES.

THE GROOVE FOR THE REAR WHEEL BEARING RETAINER RING WAS INCORRECTLY MACHINED.

NHTSA 93E035000

Report Date

13/10/1993

Component

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:DRUM

Manufacturer

MIDAS INTERNATIONAL CORP.

Consequence: IF THE RETAINING RING DOES NOT SIT CORRECTLY IN THEGROOVE, THE AXLE LUG NUTS WILL BREAK, CAUSING THE BRAKE DRUM, WHEEL, AND TIREASSEMBLY TO SEPARATE FROM THE VEHICLE.

Remedy / Corrective Action

MIDAS SHOPS WILL REPLACE THE BRAKE DRUMS WITH OTHER BRAKE DRUMS FROM ANOTHER SUPPLIER.

⭐

4.7/5.0

64 reviews

Frequently Asked Questions

How many recalls does the 1991 FORD Probe have?

The 1991 FORD Probe currently has 4 recalls according to NHTSA records. All recall information is sourced directly from the National Highway Traffic Safety Administration database.

Are 1991 FORD Probe recalls free to fix?

Yes! All safety recalls for 1991 FORD Probe vehicles must be repaired free of charge by authorized dealers, regardless of vehicle age or mileage. Contact your local FORD dealer to schedule a recall repair.

How do I check if my 1991 FORD Probe has open recalls?

You can check for open recalls by entering your VIN (Vehicle Identification Number) in our VIN decoder tool. The 17-character VIN can be found on your vehicle registration, insurance card, or on the driver's side dashboard visible through the windshield.