The Chrysler LASER has 6 NHTSA recall campaigns on record covering 1984–1986. On average a defect was admitted 8.67 years after the car was built, the slowest took 24 years. The most recalled system is Fuel System, Gasoline (2 campaigns). Owners also filed 5 complaints on this model — see what breaks.
What was recalled on the Chrysler LASER
Grouped by system. Open any row for the campaigns themselves — what failed, what it risks and how the dealer fixes it, straight from the NHTSA filing.
Fuel System, Gasoline 2 Read
What's wrong. Fuel leakage may occur in low ambient temperature operation at connections of an engine compartment fuel supply hose to the pressure regulator and to the fuel rail
Risk. In the presence of an ignition source, fuel leakage couldresult in a fire
Fix. Relocate pressure regulator; replace fuel supply with formed hose with revised routing configuration to ensure sealing integrity
What's wrong. An engine compartment fuel hose routed to the fuel system pressure regulator may have an inadequately tightened hose clamp. Consequence of defect: the fuel hose could leak and result in an engine compartment fire
Fix. Reposition and tighten to the proper torque level of the fuel hose clamp
What's wrong. Fuel leakage may occur in low ambient temperature operation at connections of an engine compartment fuel supply hose to the pressure regulator and to the fuel rail
Risk. In the presence of an ignition source, fuel leakage couldresult in a fire
Fix. Relocate pressure regulator; replace fuel supply with formed hose with revised routing configuration to ensure sealing integrity
Suspension 1 Read
What's wrong. Federal mogul is recalling 6,903 aftermarket ball joint assemblies shipped between november 9, 2007 and march 26, 2008, which may have been packaged with incorrect nuts. The part numbers packaged with incorrect nuts are: k7147, k7329, k8683, and 104353. These parts were made for use on the various vehicles listed above
Risk. The nuts included in the packaging for these ball joint assemblies are missing the intended prevailing torque (self-locking) feature. If the incorrect nut was to become loose, the joining members may loosen leading to a separation of the ball joint. This may result in loss of vehicle control, possibly resulting in a…
Fix. Federal mogul will notify owners and replace the parts free of charge. The recall began on may 22, 2008. Owners can contact federal mogul at 877-489-6659
What's wrong. Federal mogul is recalling 6,903 aftermarket ball joint assemblies shipped between november 9, 2007 and march 26, 2008, which may have been packaged with incorrect nuts. The part numbers packaged with incorrect nuts are: k7147, k7329, k8683, and 104353. These parts were made for use on the various vehicles listed above
Risk. The nuts included in the packaging for these ball joint assemblies are missing the intended prevailing torque (self-locking) feature. If the incorrect nut was to become loose, the joining members may loosen leading to a separation of the ball joint. This may result in loss of vehicle control, possibly resulting in a…
Fix. Federal mogul will notify owners and replace the parts free of charge. The recall began on may 22, 2008. Owners can contact federal mogul at 877-489-6659
What's wrong. Federal mogul is recalling 6,903 aftermarket ball joint assemblies shipped between november 9, 2007 and march 26, 2008, which may have been packaged with incorrect nuts. The part numbers packaged with incorrect nuts are: k7147, k7329, k8683, and 104353. These parts were made for use on the various vehicles listed above
Risk. The nuts included in the packaging for these ball joint assemblies are missing the intended prevailing torque (self-locking) feature. If the incorrect nut was to become loose, the joining members may loosen leading to a separation of the ball joint. This may result in loss of vehicle control, possibly resulting in a…
Fix. Federal mogul will notify owners and replace the parts free of charge. The recall began on may 22, 2008. Owners can contact federal mogul at 877-489-6659
Electrical System 1 Read
What's wrong. Battery cap vents may be partially or completely blocked with plastic flashing. Consequence of defect: a build up of internal gas pressure could occur which could result in case rupture, particularly during post charging. Should a person be in the vicinity of the battery when the case ruptures, they may be injured by the released gases and/or acid
Fix. Rework batteries by probing both vent orifices to eliminate any vent obstruction
Seats 1 Read
What's wrong. Drivers seat frame may experience fatigue failure at one (front/outboard) of its four attachments
Risk. This could result in some forward, backward or lateralmovement of seat, creating a potential for loss of control of the vehiclewhich could result in an accident
Fix. Replace drivers seat frame with a strenghtened version; also, reinforce power adjuster front crossmember to increase rigidity of seat attachment system
Latches/locks/linkages 1 Read
What's wrong. Some hood latch assemblies may have been improperly repaired at the factory, or incorrect fasteners were used. Hood latch attachment will not be strong enough and will likely weaken the inner hood panel
Fix. Inspect vehicles and, if incorrectly assembled or repaired, the hood, including the latch, will be replaced
How long a defect stays unadmitted
Campaign numbers encode the year of the announcement, so each recall on this model can be dated against the car it applies to.
| Measure | Value |
|---|---|
| Average gap before admission | 8.67 years |
| Slowest campaign | 24 years |
| Admitted 5+ years later | 33.3% |
| Campaigns on record | 6 |
Which LASER years were recalled most
Campaigns per model year. A year with more campaigns is not automatically worse — it may simply have sold in far greater numbers.
| Model year | Campaigns | Most recalled system |
|---|---|---|
| 1986 | Suspension | |
| 1985 | Suspension | |
| 1984 | Suspension |
Check your own car
A campaign applies to a range of production, not to every car of the model. The only way to know whether yours is affected — and whether the repair was already done — is by VIN.
| Step | What you get |
|---|---|
| Enter the VIN above | Open campaigns for that exact vehicle, straight from NHTSA |
| Check the repair status | Whether the free fix has already been carried out on this car |
| Book at any franchised dealer | Recall work is free regardless of age, mileage or owner |
Go deeper
A campaign covers a production range. Yours is one car.
- Check whether this exact VIN is affected — and whether the fix was done
- Alerts if a new campaign lands on a car in your garage
- Full research report as a PDF you can hand to a mechanic
- Decode a whole list of VINs at once
- No ads, on every page
- No ads, no tracking — and much more
Frequently asked questions
How many recalls does the Chrysler LASER have?
6 NHTSA campaigns on record, covering 1984–1986. Not every campaign applies to every car — coverage is by production range, so check your VIN.
Is recall work free?
Yes. Safety recall repairs are free at any franchised dealer regardless of the car's age, mileage or how many owners it has had. That is a federal requirement, not a courtesy.
How do I know if my LASER still has an open recall?
Enter its VIN above. We show campaigns that apply to that exact vehicle and whether the repair has already been recorded as done.
Why did a defect take years to be recalled?
On this model the average gap between the car being built and the defect being admitted is 8.67 years, and the slowest campaign came 24 years later. Defects usually surface as they accumulate in the field: complaints pile up, an investigation opens, and only then is a campaign issued.