335

Peterbilt 335 Recalls

All 7 NHTSA recall campaigns on the Peterbilt 335 (2005–2011) — what failed, what it risks, how it gets fixed, and how many years passed before the defect was admitted.

NHTSA campaigns · 7 campaigns · Updated Sep 1, 2026
Quick answer

The Peterbilt 335 has 7 NHTSA recall campaigns on record covering 2005–2011. On average a defect was admitted 4 years after the car was built, the slowest took 11 years. The most recalled system is Parking Brake (3 campaigns). Owners also filed 3 complaints on this model — see what breaks.

What was recalled on the Peterbilt 335

Grouped by system. Open any row for the campaigns themselves — what failed, what it risks and how the dealer fixes it, straight from the NHTSA filing.

Parking Brake 43% 3 Read
2009 Peterbilt 335 · 08V128000 · admitted after 0 years

What's wrong. Paccar is recalling 1,043 my 2008-2009 kenworth c500, t2000,t660, t800 and w900 trucks equipped with bendix mv-3 dash control valves. The molded valve body has an incorrect core pin in the injection mold causing the valve body to be oversized in the double check valve area. This condition can allow the rubber double check valve to become lodged in the body opening under certain circumstances

Risk. If the double check valve becomes lodged, in the event of a primary reservoir failure, air pressure can leak past the lodged double check valve thereby depleting the secondary reservoir, causing reduced ability for modulating the service emergency brakes. In such an event, the operator should observe an air leak,…

Fix. Dealers will replace the bendix mv-3 dash control valves free of charge. The recall began on april 14, 2008. Owners may contact kenworth at 1-425-828-4196

2007 Peterbilt 335 · 07V276000 · admitted after 0 years

What's wrong. Certain trucks equipped with bendix sr-7 spring brake modulating valves. The internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button

Risk. This could delay or failure in applying the parking brakes potentially resulting in a vehicle roll away

Fix. Dealers will install a check valve repair kit for the affected sr-7 spring brake modulating valve free of charge. The recall began on august 22, 2007. Owners may contact peterbilt at 940-591-4201

2005 Peterbilt 335 · 05V417000 · admitted after 0 years

What's wrong. On certain trucks equipped with hydraulic brakes, there may be a defect in the anchor bolt of some bosch model #305 parking brake assemblies. A different coating was applied to the bolt which did not meet paccar specifications. This could reduce the fatigue life of the bolt and lead to premature failure

Risk. If this bolt were to fail, the truck could roll away while parked without warning, which could result in a crash

Fix. Dealers will inspect the parking brake assembly and replace the defective bolts free of charge. Peterbilt's recall began on november 4, 2005; and kenworth began on november 4, 2005. Owners may contact kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4201

Latches/Locks/Linkages 14% 1 Read
2011 Peterbilt 335 · 10V162000 · admitted after 0 years

What's wrong. Peterbilt is recalling certain model year 2010 and 2011 model 325, 330, 335, 337, 340, and 348 trucks. The hood anti-blowdown device is designed to prevent unintended and unexpected hood closure. The device within can become hindered or inoperative due to unintentional latch movement which interferes with the hood pivot j-hook, latch misalignment, or latch fallout

Risk. An unintended latch closure can cause personal injury

Fix. Dealers will install hood anti-blowdown retention cables to the radiator and hood assemblies free of charge. The safety recall began on june 21, 2010. Owners may contact perterbilt at 940-591-4196

Electronic Stability Control (esc) 14% 1 Read
2011 Peterbilt 335 · 20V199000 · admitted after 9 years

What's wrong. PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."

Risk. If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash

Fix. PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at…

2009 Peterbilt 335 · 20V199000 · admitted after 11 years

What's wrong. PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."

Risk. If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash

Fix. PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at…

Engine And Engine Cooling 14% 1 Read
2009 Peterbilt 335 · 09V348000 · admitted after 0 years

What's wrong. Paccar is recalling model year 2008-2010 kenworth t300, t270, and t370, model year 2009-2010 t800 and peterbilt model year 2008-2010 335, 340, and 367 vehicles built on cummins' diesel engine. The vehicles may be designed with a hard wired, dash-mounted switch that enables the vehicle operator to inhibit aftertreatment diesel particulate filter regeneration in environments where the operator believes it may be unsafe for elevated exhaust temperatures. Due to an issue with the logic in the ecm software in these engines, the switch may not function correctly, leading the operator to believe that the switch is in "inhibit" mode when it is not

Risk. This condition will permit hot exhaust gases to exit the vehicle tailpipe, increasing the risk of melting or burning of nearby surfaces, or a fire

Fix. Paccar is working with cummins to repair the engines free of charge please see 09e-046. The safety recall began on october 1, 2009. Owners may contact cummins at 1-800-diesels (1-800-343-7357)

Suspension 14% 1 Read
2007 Peterbilt 335 · 06V490000 · admitted after 0 years

What's wrong. On some peterbilt trucks, certain parts used in the air suspensions have a high copper content causing premature failure

Risk. Failure could cause erratic vehicle handling which can cause a vehicle crash without warning

Fix. Dealers will inspect and, when necessary, replace the defective parts. The recall began on january 17, 2007. Owners may contact peterbilt at 1-940-591-4196

How long a defect stays unadmitted

Campaign numbers encode the year of the announcement, so each recall on this model can be dated against the car it applies to.

FIG.03·Peterbilt 335 — how fast defects were admitted
MeasureValue
Average gap before admission4 years
Slowest campaign11 years
Admitted 5+ years later40%
Campaigns on record7
ROWS 4·SOURCE ForCar, computed from NHTSA campaign numbers

Which 335 years were recalled most

Campaigns per model year. A year with more campaigns is not automatically worse — it may simply have sold in far greater numbers.

FIG.04·Peterbilt 335 recalls by model year
Model yearCampaignsMost recalled system
20112Latches/Locks/Linkages
20093Parking Brake
20072Suspension
20051Parking Brake
ROWS 4·SOURCE NHTSA recall campaigns

Check your own car

Each of these 7 campaigns covers a range of production, not every Peterbilt 335 ever built — two cars of the same year can differ by a single week at the plant. Whether yours is among them, and whether the free repair was already carried out, is answered only by the number on its windscreen: check this 335 by VIN.

FIG.05·How to check a recall by VIN
StepWhat you get
Enter the VIN aboveOpen campaigns for that exact vehicle, straight from NHTSA
Check the repair statusWhether the free fix has already been carried out on this car
Book at any franchised dealerRecall work is free regardless of age, mileage or owner
ROWS 3·SOURCE ForCar

A campaign on one model says little about the brand as a whole — see how the Peterbilt 335 compares in the full recall check by make and model →

Upgrade to Pro

A campaign covers a production range. Yours is one car.

  • Check whether this exact VIN is affected — and whether the fix was done
  • Alerts if a new campaign lands on a car in your garage
  • Full research report as a PDF you can hand to a mechanic
  • Decode a whole list of VINs at once
  • No ads, on every page
  • No ads, no tracking — and much more
Free plan available — no credit card needed

Frequently asked questions

How many recalls does the Peterbilt 335 have?

7 NHTSA campaigns on record, covering 2005–2011. Not every campaign applies to every car — coverage is by production range, so check your VIN.

Is recall work free?

Yes. Safety recall repairs are free at any franchised dealer regardless of the car's age, mileage or how many owners it has had. That is a federal requirement, not a courtesy.

How do I know if my 335 still has an open recall?

Enter its VIN above. We show campaigns that apply to that exact vehicle and whether the repair has already been recorded as done.

Why did a defect take years to be recalled?

On this model the average gap between the car being built and the defect being admitted is 4 years, and the slowest campaign came 11 years later. Defects usually surface as they accumulate in the field: complaints pile up, an investigation opens, and only then is a campaign issued.

Recall campaigns from NHTSA, published as filed. Years elapsed before admission computed by ForCar from the campaign number, which encodes the year it was announced. Last updated Sep 2026. — ForCar Reviewed by , founder of ForCar.