Most Kenworth T800 VINs open with 1XK (the United States, 1994–2001), 1NK (the United States, 1999–2005) or 2XK (Canada, 1995). Position 11, the plant, shows 4 codes, most often J (64%); a 2005 T800 carries 5 in position 10. Decoding one also brings up 54 recall campaigns and 14 owner complaints from NHTSA.
Got a VIN from another make? The free VIN decoder reads any 17-character VIN, whatever built it.
How to read a Kenworth T800 VIN
Here is a real 2005 Kenworth T800 VIN from our database, split into its parts:
VIN 3WKDDB9X45F081208 — decoded free on its own report page.
| Position | Section | What it tells you |
|---|---|---|
| 1–3 | WMI | World Manufacturer Identifier — country, manufacturer and vehicle type. |
| 4–8 | VDS | Vehicle Descriptor Section — body style, engine, restraint system, series. |
| 9 | Check digit | A calculated digit that validates the whole VIN. Wrong digit = wrong VIN. |
| 10 | Model year | One character for the model year. Letters skip I, O, Q, U and Z. |
| 11 | Plant | The assembly plant that built the car. |
| 12–17 | Serial | Sequential production number of this exact vehicle. |
Kenworth T800 VIN prefixes, and when each one was used
The Kenworth T800 VINs on record carry 4 different prefixes. The main one is 1XK (the United States, 1994–2001), then 1NK (the United States, 1999–2005):
| VIN starts with | Years seen | Built in | Vehicle type | VINs on record |
|---|---|---|---|---|
| 1XK | 1994–2001 | United States | Truck | |
| 2XK | 1995–1995 | Canada | Truck | |
| 1NK | 1999–2005 | United States | Incomplete Vehicle | |
| 3WK | 2005–2005 | Mexico | Truck |
Position 11 names the plant. On the Kenworth T800 it is not one number either — assembly moved between 4 of them over the years:
| Plant code | Years active | VINs on record | Share |
|---|---|---|---|
| J | 1994–2005 | 9 | |
| M | 1995–1995 | 2 | |
| R | 1999–1999 | 2 | |
| F | 2005–2005 | 1 |
Counted from 14 dated Kenworth T800 VINs attached to NHTSA complaints, each code checked against the NHTSA manufacturer registry.
Model-year codes for the Kenworth T800
Position 10 carries the model year, skipping I, O, Q, U and Z. The alphabet comes round every 30 years, which the Kenworth T800 has not yet outlived: its 20 years still map one-to-one. All 20 model years of the Kenworth T800, 1986 to 2005, with the character each one carries:
| Model year | VIN character (position 10) | Same character as |
|---|---|---|
| 2005 | 5 | — |
| 2004 | 4 | — |
| 2003 | 3 | — |
| 2002 | 2 | — |
| 2001 | 1 | — |
| 2000 | Y | — |
| 1999 | X | — |
| 1998 | W | — |
| 1997 | V | — |
| 1996 | T | — |
| 1995 | S | — |
| 1994 | R | — |
| 1993 | P | — |
| 1992 | N | — |
| 1991 | M | — |
| 1990 | L | — |
| 1989 | K | — |
| 1988 | J | — |
| 1987 | H | — |
| 1986 | G | — |
Body and engine characters we see on Kenworth T800 VINs
Positions 4–8 are the maker's own build code. Across 5 VINs the Kenworth T800 uses 4 different characters in positions 4, 5 and 8:
| Position | Characters seen on real VINs | Variety |
|---|---|---|
| 4 — body | D (100%) | 1 distinct |
| 5 — series | D (60%) · L (40%) | 2 distinct |
| 8 — engine | X (100%) | 1 distinct |
What a decoded Kenworth T800 VIN gets you
Behind a Kenworth T800 VIN: 14 owner complaints and every recall campaign NHTSA has on record:
| Data | For this model | Source |
|---|---|---|
| Recall campaigns | 54 campaigns | NHTSA |
| Owner complaints | 14 filed | NHTSA |
| Model years covered | 20 years | ForCar catalog |
Where to find the VIN on a Kenworth T800
A Kenworth T800 VIN normally opens with 1NK; the full number sits in four places, and all four must match.
| Where | How to see it | Why it matters |
|---|---|---|
| Dashboard, driver side | Through the windshield, bottom corner | Easiest to check before you touch anything |
| Driver door jamb | Open the door, sticker on the pillar | Also lists tire pressures and build date |
| Under the hood | Firewall or strut tower plate | Survives a windshield replacement |
| Title and insurance | Paper documents | Must match the car — a mismatch means fraud or a swapped panel |
You know what it is. Find out what it's worth.
- Exact value for this VIN, adjusted for mileage
- The original window sticker and factory options
- Full research report as a PDF you can hand to a mechanic
- Decode a whole list of VINs at once
- No ads, no tracking — and much more
Frequently asked questions
Is this Kenworth T800 VIN decoder free?
Yes, with no account. Besides the year, plant and build characters it shows 54 recall campaigns and 14 owner complaints NHTSA holds on the Kenworth T800.
Why does my T800 VIN start differently from another T800?
Because the Kenworth T800 was built under several maker codes, by plant and period. Across the Kenworth T800 VINs on record we see 4 of them: 1XK (1994–2001), 2XK (1995–1995), 1NK (1999–2005), 3WK (2005–2005). Each is genuine for its years.
What year is my T800 by its VIN?
Read position 10: a 2005 T800 carries 5, a 2004 T800 carries 4, a 2003 T800 carries 3.
Where was my T800 built?
Position 11 names the plant. Across 14 dated Kenworth T800 VINs it reads J 64%, M 14%, R 14%, F 7%.
What does position 4 mean on a Kenworth T800 VIN?
It is part of the maker's own build code, so read it against this model, not a generic chart. On 5 Kenworth T800 VINs here, D is the most common character in position 4, on 100% of them.
What if the VIN on the dashboard doesn't match the door jamb?
On a Kenworth T800 check the prefix first: most genuine ones open with 1XK, 1NK or 2XK. A plate that starts with anything else, or disagrees with the other copies of the number, needs documents checked before any money changes hands.
Mark ForCar as a preferred source and our data shows up first in your Google results. One click, no account.